| Materials: metal, powder paint, rope. The seat rim is made of a metal pipe and braided on top with a soft rope. The grid inside is also made of rope. The rim was recorded on three supported curved arches made of a metal round pipe with a diameter of 33.5 mm, which through a triangular plate 8 mm thick are installed on a movable support. As a mobile support, springs are used type width 20 mm x length of 125 mm x height 300 mm x thickness 7 mm of end -press in the amount of three pieces. The embedded element has a overall dimensions of at least a width of 680 mm x length 630 mm, a height of 470 mm. The upper part is made of a 8 mm thick metal triangular plate, in which 6 holes with a diameter of 16.5 mm are drilled with a welding bolts installed from the bottom, for fixing the rocking. The lower part of the embedded element consists of three supports made of a metal round pipe with a diameter of 33.5 mm with a wall thickness of 2.8 mm. To the lower part of the supports, the “bloodsters” are welded, made of a metal plate with a cross -section of a width of 5 mm x length 50 mm. All available metal parts are covered with powder polyester paint. All fasteners are galvanized. Included components: rocking on 3 springs with a round wicker seat-1 pc, a set of fasteners-1 pcs. embedded elements
Basic information
Limitations on the number of users during simultaneous operation 1
Age limit from 3
Age limit up to 12
|
Spring Rider Nest
Call/WhatsApp: +971 55 4260441
| Dimensions | 100 × 100 × 64.5 cm |
|---|
