Materials: HDPE plastic, stainless steel metal, powder paint. The central axis of the bearing assembly must be made of a solid metal circle with a landing diameter of 45-50 mm. The moving part of the carousel must rotate on at least two roller bearings – radial and angular contact, installed in a stainless steel pipe with a diameter of 108-110 mm with a wall thickness of up to 6 mm. The frame of the moving part and the guards must be made of stainless steel pipe with a diameter of at least 32 mm with a wall thickness of ≥ 2 mm. On the fence, along the perimeter, there should be a seat made of yellow sheet of low-density polyethylene HDPE (high density – HDPE), with a thickness of at least 15 mm, which can be used in the production of children’s complexes. Sheet polyethylene must be resistant to ultraviolet rays, not crack when exposed to low temperatures and not affected by humidity. The round rim in the center of the carousel and the lintels under the floor must be made of stainless steel pipe with a diameter of 26.0 mm and a wall thickness of at least 2 mm. The floor must be made of low-density polyethylene sheet HDPE (high density – HDPE), at least 15 mm thick, with grooves milled around the circumference. Free fall height: 450 mm. Contents: assembled carousel – 1 set. Installation: The installation of supporting parts of the equipment must be carried out with concreting of the embedded element
Basic information
Age Limit: 3 to 12 Years
Materials:
- Stainless steel
- HDPE
Dimensions
- Width: 153 cm
- Length: 153 cm
- Height: 82 cm
- Fall height: 40 cm
